Ballvalve

FORGED STEEL BALL VALVES

STANDARD

REFERENCE

DESIGN BS 5351 / ISO 17292
FACE TO FACE ASME B16.10 , MFG STD.
END CONNECTION ASME B1.20.1, ASME B16.11, BS 21, ASME B16.25
FIRE TEST API 6FA / API 607 / BS 6755 PART-2
TESTING API 598 / EN 12266 / BS 6755 PART-1
NACE COMPLIANCE NACE MR 0175 / 0103, ISO 15156
PT RATING ASME B16.34
SPECIFICATIONS
VALVE SIZES 1/4" TO 4"
CLASS RATINGS CLASS 125 TO 4500, PN CLASSES ALSO AVAILABLE
END CONNECTIONS SCRD-NPT(F), BSP(F), SWE, BWE
DESIGN TYPES 2 PIECE DESIGN, 3 PIECE DESIGN, TOP ENTRY
TYPE OF PORT FULL PORT, REDUCED PORT
OPERATION LEVER / WRENCH, GEARBOX, PNEUMATIC & HYDRAULIC, ELECTRICAL ACTUATORS
ACTUATORS ACCESSORIES POSITIONER, LIMIT SWITCH, AIR FILTER REGULATOR, IP CONVERTER, SOLENOID VALVE
SPECIAL REQUIREMENTS METAL TO METAL SEAT, CLADDING , FUGITIVE EMISSION, LIVE LOADING ARRANGEMENT, LOCKING ARRANGEMENT, CRYOGENIC SERVICE, CAVITY RELIEF, POP EXTENSION

Note:

  • MANUFACTURING SIZES RANGES WILL BE BASED ON PRESSURE CLASSES, SERVICE APPLICATION etc.,

MATERIAL OF CONSTRUCTION
BODY / END CONNECTOR LOW TEMPERATURE CARBON STEEL, ALUMINIUM-BRONZE, DUCTILE IRON, CAST IRON, STAINLESS STEEL, DUPLEX STAINLESS STEEL, EXOTIC MATERIALS, SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS
TRIM STAINLESS STEEL, DUPLEX STAINLESS STEEL, EXOTIC MATERIALS, SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS
SEAT PTFE, RPTFE, GLASS FILLED, PEEK, DEVLON, METAL to METAL VITON etc.,
SEALS & PACKINGS PTFE, RPTFE, GRAPHITE, GRAPHOIL, VITON, NBR, HNBR, etc.,
GASKET PTFE, RPTFE, PEEK, SPIRAL WOUNDED, OCTAGONAL RING TYPE (RTJ) METAL GASKET IN SOFT IRON.
BEARING PTFE, RPTFE, BRONZE etc.,
STUDS & NUTS ASTM A193 Gr.B7/A194 Gr.2H, B7M/2HM, B8/8, B8M/8M, L7/4, B16/2H etc.,

Note:

  • ACTUAL MATERIALS OF CONSTRUCTION WILL DEPEND UPON THE VALVE SIZE,PRESSURE CLASS, END CONNECTION AND SERVICE CONDITIONS.
  • OTHER MATERIALS ARE ALSO AVAILABLE BASED UPON THE REQUEST
  • BODY & CONNECTOR SHALL BE FORGED OR CASTED DEPENDING UPON THE REQUEST