| SPECIFICATIONS | |
|---|---|
| VALVE SIZES | 1/2" TO 250" |
| CLASS RATINGS | CLASS 125 TO 600, PN CLASSES ALSO AVAILABLE |
| END CONNECTIONS | FLANGED (RF, FF) |
| TYPE OF WEDGE | SOLID, FLEXIBLE, SPLIT & PARALLEL SLIDE |
| PORT TYPE | REDUCED OR FULL |
| TYPE OF DESIGN | OS&Y, ISRS, ISNRS |
| OPERATION | MANUAL, PNEUMATIC, HYDRAULIC & ELECTRICAL ACTUATORS |
| ACTUATOR ACCESSORIES | SOLENOID VALVE, LIMIT SWITCH, AIR FILTER REGULATOR, VOLUME BOOSTER, QEV |
| SPECIAL REQUIREMENTS | LOCKING ARRANGEMENT, POSITION INDIACATOR, EXTENDED BONNET / SPINDLE, DRAIN & VENT CONNECTION, SPARK TESTING ON LINIED COMPONENT |
| TYPE OF BONNET | BOLTED BONNET, THREADED BONNET & EXTENDED BONNET |
| STANDARD | REFERENCE |
|---|---|
| DESIGN | API 602, API 600 / ISO 10434, API 603, API 6D, ASME B16.34, AWWA C515 /MANU.STD |
| FACE TO FACE | MANUFACTURING STANDARD, ASME B16.10, API 6D, EN 558 |
| END CONNECTION | ASME B16.1, ASME B16.5, ASME B16.47 SER - A / B, EN 1092 PART 1 / 2, ISO 7005, DIN 2632 / 2633, BS 10 TABLE D, E & F |
| TESTING | API 598 , API 6D, BS EN 12266 - 1 & 2, BS 6755 PART-1, ISO 5208 |
| NACE COMPLIANCE | NACE MR 0175 / ISO 15156, NACE MR 0103 |
| PT RATING | ASME B16.34, API 598 |
| MATERIAL OF CONSTRUCTION | |
|---|---|
| BODY / BONNET / YOKE | CAST IRON, DUCTILE IRON, SG IRON, CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS & OTHER MATERIALS UPON REQUEST |
| TRIM | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, & OTHER MATERIALS UPON REQUEST |
| PACKINGS AND SEALS | PTFE V-RINGS, RPTFE, FILLED PTFE, FKM (VITON), NBR, NITRIL RUBBER, SPECIAL MATERIALS. |
| GASKET | PFA, PTFE, RPTFE, SPECIAL MATERIALS. |
| FASTENERS | HIGH TENSILE, STAINLESS STEEL, OTHER SPECIAL MATERIALS UPON REQUEST |
| SPRINGS | STAINLESS STEEL, INCONEL 625, INCONEL 825, INCONEL X-750, CHROME STEEL, HIGH NICKEL ALLOY SPRINGS |
| HANDWHEEL | CARBON STEEL, DUCTILE IRON, MALLEABLE IRON, STAINLESS STEEL, HIGH IMPACT STEELS |
| LINING MATERIAL | EPDM, PFA, NBR, FEP (FLUORINATED ETHYLENE PROPYLENE), PTFE, FUSION BONDED EPOXY, NATURAL RUBBER, CERAMIC,CORACOAT & OTHER SPECIAL LINING MATERIAL UPON REQUEST |
