| SPECIFICATIONS | |
|---|---|
| VALVE SIZES | 2" TO 250" |
| CLASS RATINGS | CLASS 150 TO 2500, API 6A PRESSURE CLASSES |
| END CONNECTIONS | FLANGED (RF, RTJ), BWE, THREADED ENDS, HUB ENDS |
| TYPE OF WEDGE | SOLID, SPLIT, & PARALLEL SLIDE |
| PORT TYPE | FULL OR REDUCED |
| TYPE OF DESIGN | OS&Y, SLAB GATE, SINGLE EXPANDING / DOUBLE EXPANDING GATE, DOUBLE ISOLATION |
| OPERATION | SUBSEA GEAR INCLUSIVE OF ROV DEVICE, ROV, HYDRAULIC ACTUATOR |
| ACTUATOR ACCESSORIES | HYDRAULIC SOLENOID VALVE, HYDRAULIC LIMIT SWITCH, HYDRAULIC FILTER REGULATOR, ROV ACCESSORIES |
| SPECIAL REQUIREMENTS | CAST OR FORGED BODY CONSTRUCTION, DOUBLE BLOCK AND BLEED (DBB) DESIGN, PARTIAL OR FULL CLADDING, SINGLE (SEAL CLOSED) OR DOUBLE (SEAL OPEN AND CLOSED), EMERGENCY SHUTDOWN, FLOW LINE, HIPPS, HOT TAPPING, ISOLATION, MANIFOLD, PIG LAUNCHING & RECEIVING, PLEM, PLET, XMAS TREE, RISER MODULE APPLICATIONS. |
| TYPE OF BONNET | BOLTED BONNET |
| STANDARD | REFERENCE |
|---|---|
| DESIGN | API 6DSS / API 17D / Manuf. Standard |
| FACE TO FACE | ASME B16.10, API 6D |
| END CONNECTION | ASME B16.25, ASME B1.20.1, ASME B16.5, ASME B16.47 SER - A / B, API 6A |
| TESTING | API 598, API 6D, API 6DSS |
| NACE COMPLIANCE | NACE MR 0175 / ISO 15156, NACE MR 0103 |
| PT RATING | ASME B16.34 |
| MATERIAL OF CONSTRUCTION | |
|---|---|
| BODY/ BONNET/ YOKE | CARBON STEEL, LOW ALLOY STEEL, STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, OTHER SUITABLE MATERIALS FOR SEAWATER ENVIRONMENT |
| TRIM | STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, OTHER SUITABLE MATERIALS FOR SEAWATER SERVICE |
| PACKINGS AND SEALS | PTFE, RPTFE, GRAPHITE, GRAPHOIL, SPECIAL MATERIALS FOR SEA WATER APPLICATION |
| GASKET | PTFE, RPTFE, GRAPHITE, GRAPHOIL, SPIRAL WOUNDED GASKETS, SOFT IRON METAL RING GASKETS, SPECIAL MATERIALS FOR SEA WATER APPLICATION |
| FASTENERS | ASTM A193 Gr.B7/A194 Gr.2H, B7M/2HM, B8/8, B8M/8M, B16/2H |
